NANOPOLISH FOAMING B6

Nanopolish Foaming B6 by Fra-Ber is a nanotechnological car polish and shampoo with a sophisticated foaming formula to clean and enhance shine.

Main features:

• Cleaner, polish and protective coating: a 3-in-1 product able to clean, polish and protect treated vehicles that can be used both as a nanotechnological shampoo and to maintain previously applied protective coatings and wax treatments;
• Water-repellent barrier and silk effect: thanks to the nanotechnology it helps dry the vehicle and improves visibility in the rain, leaving the bodywork smooth and soft to the touch;
• Mirror effect and unbeatable shine: thanks to the polish effect it gives added gloss and shine to the treated vehicle;
• Fast and simple: a treatment similar to wax jars that can be easily and effortlessly applied in just ten minutes;
• Multi-format: it is available in both a 1 L and 4.54 L format;
• Concentrated: the product has a high concentration of active substances and is sold as a concentrate to be diluted before use, with 1 L of product yielding up to 50 L of ready-to-use solution;
• Suitable for all vehicles: it can be used on all types of vehicles including sports cars, utility vehicles, vans, camper vans, trucks and motorbikes.

• For faster washing or cleaning, combining several steps without compromising the end result;
• As a versatile product that can also be used to maintain protective coatings or wax treatments;
• To save time otherwise needed to apply a jar of wax thanks to our quick and easy-to-use liquid polish.

We recommend using Nanopolish Foaming B6 as a nanotechnological car polish and shampoo.

Main steps:

1. 1. Rinse the vehicle to remove any impurities;
   2. The product must be applied with a foam gun, pressure spray pump or with a bucket and sponge/mitt.
      1. With the foam gun and pressure spray pump:
         1. Using the indicated dilution ratio, spray the foam over the entire vehicle, starting from the bottom and applying the product horizontally, gradually moving upwards. This will prevent dripping during rinsing.
         2. Then rinse with plenty of high-pressure water. Move in a horizontal direction from the top part of the vehicle, gradually moving downwards.
         3. Wipe away any remaining water droplets with a soft cloth.
      2. With a bucket and sponge/mitt:
         1. Make sure to remove any bracelets or wristwatches to avoid accidentally scratching the bodywork during washing;
         2. Dilute between 20 and 50 ml of product per litre of water;
         3. Stir to homogenise the solution before use;
         4. Use the resulting mixture with a mitt or clean sponge;
         5. Rinse with plenty of water, from top to bottom;
         6. Wipe away any remaining water droplets with a soft cloth.

If applied with a pressure spray pump or bucket: dilute to a ratio between 1:19 and 1:49, i.e., use between 50 ml and 20 ml of product and top up with water (between 950 ml and 980 ml) to obtain a 1 L ready-to-use solution.

If applied with a foam gun and foam lance: use either pure or diluted up to a ratio of 1:10, i.e., use up to 90 ml of product and top up with water (910 ml) to obtain a 1 L ready-to-use solution. During application, the actual dilution ratio may reach between roughly 1:15 and 1:165.